002 Bit Switch 2 Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 Applying a Collate Type Shift Collate Normal
Collate
A collate type (shift or normal) will be applied to all jobs that do not explicitly define
a collate type.
Note: If #5-0 is enabled, this BitSwitch has no effect.
bit 3 [PCL5e/c,PS]: PDL Auto Switching Enabled Disabled
Enables/Disables the MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto PDL
switching is disabled, these jobs will not be printed properly.
bit 4 DFU - -
bit 5 DFU - -
bit 6
Switch dither
Use normal
dither
Use alternative
dither
*Please refer to RTB#RD014018
bit 7 DFU - -
1001 [Bit Switch]
8. Printer SP Mode
806
To Next Page
Loading...
Need help?
General