001
- *CTL * see BitSwitch below:
Sets Scanner FlairAPI Function enable / disable.
This SP is set by BitSwitch and needs to reboot the machine after making changes.
bit Setting
meanings
Description
0 1
bit 0 Start of FlairAPI Server
Off
(Do not
Start)
On
(Start)
Sets whether to start exclusive
FlairAPI http server. If it is 0,
scanning FlairAPI function and
simple UI function will be
disabled. The machine installed
Android operating panel option,
set “1”, others set “0”.
bit 1
Access permission of
FlairAPI from outside of
the machine
Disabled Enabled
If it is “0”, accessing is limited
from the machine only, such as
operating panel, SDK/J, MFP
browsers etc… If it is “1”,
accessing is allowed from
outside of FlairAPI such as PC,
Remote UI, IT-Box etc…
bit 2 Reserved - - -
bit 3 Reserved - - -
bit 4 Simple UI Function Disabled Enabled
If it is “1”, the machine can be
used Scanner Simple UI. If it is
“0”, requesting URL of Simple UI
returns “404 Not Found”
bit 5
Accessing permission of
Simple UI from outside of
the machine
Disabled Enabled
If it is “0”, accessing is limited
from the machine only
(operating panel and MFP
browser). If it is “1”, accessing is
allowed from outside of Simple
UI such as PC, mobile devices,
and so on.
bit 6 Reserved - - -
bit 7 Reserved - - -
SP1-XXX
821