4. When the update is complete, "Update SDK / J done SUCCESS" will appear in the banner
message of the touch panel display. After turning off the power, remove the SD card from the slot.
When you fail to update, "Update SDK/J done FAIL" is displayed. You can confirm the cause of
the error message below.
5.
Reconfigure the Heap size. ([Extended Feature Settings]-[Administrator Tools]-[Heap/Stack Size
Settings]). See the manual for the ESA application to know what value to set for the heap size.
6. Return to the previous setting for the boot priority application.
List of Error Messages
Update results are output as a text file on the SD card called "sdkjversionup.log" in the "\sdk \update"
folder.
Result File contents Description of the output
Success
script file = /mnt/sd0/sdk/update/
bootscript
2012/08/22 17:57:47 start
2012/08/22 17:59:47 end SUCCESS
Boot script path
Boot scripts processing start time
End time boot script processing, the results
Failure
script file = /mnt/sd0/sdk/update/
bootscript
2012/08/22 17:57:47 start
XXXX Error
2012/08/22 17:57:57 end FAIL
Boot script path
Boot scripts processing start time
Error message (Possibly multiple)
End time boot script processing, the results
Updating Java VM
833
To Next Page
Loading...
Need help?
General