Ricoh Nashuatec 3715 - Page 85

3. Remove the 2 portions [A] on the left hand side of the copier with cutting
pliers as shown.
4. Remove the rear cover [B] (2 screws).
5. Mount the sorter holder bracket [C] on the copier frame (3 tapping
screws).
6. Mount the magnetic catch [D] near the exit cover (2 tapping screws).
[B]
[A]
A657I502.wmf
[D]
[C]
A657I503.wmf
SORTER (A657) 20 December 1996
3-14