Need help?Do you have a question about the Ricoh aficio 1013 and is the answer not in the manual?
Details on environmental, level, space, and power requirements for machine installation.
Procedure for checking accessories and installing the copier unit.
Procedure for checking accessories and installing the paper tray unit.
Procedure for checking accessories and installing the paper tray unit heater.
Procedure for checking accessories and installing the document feeder.
Procedure for installing a DIMM module into the machine.
Details on preventive maintenance schedules and PM tables.
General, battery, PCU, transfer roller, scanner, laser, fusing, paper feed, and important precautions.
Details on replacing the fusing unit, exit sensor, and stripper pawls.
Procedure for replacing the Photoconductor Unit (PCU).
Details on replacing PSU bracket, laser unit, LD unit, and polygon mirror motor.
Procedures for adjusting printing and scanning image quality.
Overview of service call levels, SC code descriptions, and possible causes.
Information on sensor/switch open errors and blown fuse conditions.
Instructions on entering, exiting, and using the Service Program (SP) mode.
Detailed tables of SP modes for feed, drum, scanner, mode, peripherals, and data log.
Overview of user tools for system settings and copy features.
Details on component layout, paper path, drive layout, block diagrams, and main PCBs.
Explanation of image processing steps, original modes, and adjustments.
Overview and safety switches for the laser exposure unit.
Overview and drive mechanism of the PCU, drum charge, and development process.
Details on paper feed mechanisms, image transfer, and paper separation.
Information on fusing unit operation, temperature control, overheat protection, and energy saver modes.
Details on configuration, copy process, size, weight, and power source.
List of supported paper sizes for main unit, options, and bypass tray.
Mechanical, electrical, and drive component layouts for the document feeder.
Explanations of pick-up, separation, clutch, transport, exit, sensors, and electrical circuits.
Procedures for replacing DF upper covers, original table, feed unit, rollers, motor, clutch, and sensors.
Mechanical, electrical, drive layouts, and electrical circuit of the paper tray unit.
Procedures for replacing feed rollers, friction pads, and sensors.
Requirements, fax unit installation, and initial programming procedures.
Information on special tools, lubricants, and PM tables for the fax unit.
Precautions and procedures for replacing FCU, NCU, and monitor speaker.
Guides on handling error codes and fax SC codes.
Details on service level functions, bit switches, NCU parameters, and RAM addresses.
Information on PCBs, including FCU and NCU.
General specifications, features list, and programmable capacities for the fax unit.
Procedures for installing the printer controller, memory boards, and optional units.
Guidance on interpreting error codes and LED display for troubleshooting.
Information on service program mode, menu, firmware updates, and diagnostics.
Block diagram and controller functions, including paper source selection.
General specifications, supported paper sizes, software, and machine configuration.
To Next Page
General