BIT SWITCHES
B465 5-16 SM
5.2.2 SCANNER SWITCHES
Scanner Switch 00
No. FUNCTION COMMENTS
0 MTF
0: Disabled 1: Enabled
1 Text/Photo separation in
halftone mode
0: Disabled 1: Enabled
Normally keep this bit at 1 to get a good halftone
quality.
2, 3
Maximum transmittable
document length
Bit 3 2 Setting
0 0 600 mm
0 1 1200 mm
1 0 Not used
1 1 Not used
This is effective only in FAX mode.
4
OR processing in immediate
TX and copying (Standard
resolution)
0: Disabled
1: Enabled
0: The machine scans the document in 3.85 line/mm
steps, then transmits or makes copies.
1: The machine scans the document in 7.7 line/mm
steps. Each pair of lines goes through OR
processing before transmission or copy making.
Toner may be used up earlier if OR processing is
enabled.
5–7 Not used Do not change these settings.
Scanner Switch 01 - Not used (do not change any of these settings)
Scanner Switch 02 - Not used (do not change any of these settings)
Scanner Switch 03 - Not used (do not change any of these settings)
Scanner Switch 04 - Not used (do not change any of these settings)
Scanner Switch 05 - Not used (do not change any of these settings)
Scanner Switch 06 - Not used (do not change any of these settings)
Scanner Switch 07 - Not used (do not change any of these settings)
Scanner Switch 08 - Not used (do not change any of these settings)
Scanner Switch 09 - Not used (do not change any of these settings)
Scanner Switch 0A - Not used (do not change any of these settings)
Scanner Switch 0B - Not used (do not change any of these settings)
Scanner Switch 0C - Not used (do not change any of these settings)
Scanner Switch 0D - Not used (do not change any of these settings)
Scanner Switch 0E - Not used (do not change any of these settings)
Scanner Switch 0F - Not used (do not change any of these settings)
To Next Page
Loading...
