Ricoh P 310 Setup Guide

17
Selecting the Telephone Line Type and Telephone Network Connection Type
1. Press [Setting].
2. Press [Administrator Tools].
3. Enter the password using the number keys, and then press
[OK].
You can display the software keyboard by double tapping the
entry area on the display.
4. Press [Dial/Push Phone].
5. Press the telephone line type appropriate for your
telephone service.
6. Press [PSTN / PBX].
7. Press [PSTN] or [PBX].
8. Press the [Home] key to return the initial screen.
Setting the Outside Line Access Number
If you have selected PBX, use the following procedure.
1. Press [Setting].
2. Press [Administrator Tools].
3. Enter the password using the number keys, and then press
[OK].
You can display the software keyboard by double tapping the
entry area on the display.
4. Press [PBX Access Number].
5. Enter the outside line access number using the number
keys, and then press [OK].
6. Press the [Home] key to return the initial screen.

Ricoh P 310 Specifications

General

Brand	Ricoh
Model	P 310
Category	All in One Printer
Language	English