Ricoh Printer/Scanner Unit Type 8000 Troubleshooting Guide

Removing Punch Waste
121
7
Removing Punch Waste
This section describes how to remove punch waste.
Note
❒ While “Hole Punch Receptacle is full.” is displayed, you cannot use
the Punch function.
3,000 Sheet-50 Sheet Staple Finisher and Booklet Finisher
The following procedure describes how to remove punch wastes from the 3,000
Sheet-50 Sheet Staple Finisher and Booklet Finisher.
A Open the front cover of finisher.
B Pull out the punch waste box carefully, and then remove punch waste.
ANS064S
ADB033S

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Print Technology	Laser
Print Speed (Black)	80 ppm
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan