Other Print Operations
106
3
Punch
With the optional 3,000Sheet-50Sheet Staple Finisher, 3,000Sheet-100Sheet Staple
Finisher, or Booklet Finisher installed, holes can be punched into printed output.
Punch position
The specified punch position varies depending on paper feed and print data ori-
entation. The following table shows punch positions:
Note
❒ Punch positions will vary slightly from page to page as holes are punched
into each sheet individually.
❒ For information about paper sizes that can be punched, see “Specifications”,
General Settings Guide.
❒ For printing methods, see the printer driver Help.
ANV101S
To Next Page
Loading...
