No. Item Description
025 [Paper Transfer Current: TE
Length: BW]
Adjust the area to apply the current for paper transfer at
the trailing edge of the paper when printing in each color
mode (black-and-white/color).
031 [Paper Transfer Current: TE
Length: FC]
037 [Ppr Trns CV: Start Timing:
BW: Side 1]
Adjust the timing to start the constant voltage control for
the bias during paper transfer when printing in each print
mode (color/black-and-white, one-side/duplex).
038 [Ppr Trns CV: Start Timing:
BW: Side 2]
041 [Ppr Trns CV: Start Timing:
FC: Side 1]
042 [Ppr Trns CV: Start Timing:
FC: Side 2]
039 [Ppr Trns CV: Duration:
BW: Side 1]
Adjust the duration of the constant voltage control for the
bias during paper transfer when printing in each print
mode (color/black-and-white, one-side/duplex).
040 [Ppr Trns CV: Duration:
BW: Side 2]
043 [Ppr Trns CV: Duration: FC:
Side 1]
044 [Ppr Trns CV: Duration: FC:
Side 2]
045 [Ppr Trns Contact Mode] Specify whether or not to enable the paper transfer
contact/separation mode.
046 [Ppr Trns Gap: On Timing] Adjust the timing for the intermediate transfer belt and the
paper transfer unit to come into contact during paper
contact/ separation.
047 [Ppr Trns Gap: Off Timing] Adjust the timing for the intermediate transfer belt and the
paper transfer unit to separate during paper contact/
separation.
048 [Pre-contact Movement of
Paper Transfer]
Adjust the amount of contact to be made before the
intermediate transfer unit contacts with the secondary
transfer unit when the secondary transfer unit is operating
in paper contact/separation mode.
4. Details of Menu Items in Advanced Settings
108
To Next Page
Loading...
