Ricoh Pro C5210s - Page 69

Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[2 Holes Type JP / EU] 0.0 2.0 -2.0 0.5 mm
[3 Holes Type US]
[4 Holes Type EU]
[4 Holes Type NE]
[2 Holes Type US]
0808: [Punch Position: With Feed]
Adjust the horizontal position of the punch holes when using Finisher SR5070 or Booklet Finisher
SR5080.
Press [+] to move the position toward the top edge (left) relative to the paper feed direction, or [−] to
move it toward the bottom edge (right).
Paper feed direction
Paper feed direction
2 Holes Top
2 Holes Left
CDS026
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[2 Holes Type JP / EU] 0.0 4.0 -4.0 0.5 mm
[3 Holes Type US]
[4 Holes Type EU]
[4 Holes Type NE]
[2 Holes Type US]
Setting Values
67