Ricoh Pro C5210s - Page 70

0809: [Correct Punch Skew]
Specify whether or not to enable punch skew correction when using Finisher SR5070 or Booklet Finisher
SR5080.
If jams or edge-folding problems occur particularly when punching lightweight paper, select [Off].
Setting Items Values Default Value
[Correct Punch Skew] [On]
[Off]
[On]
0810: [Punch Skew Correction]
Adjust the amount of skew correction for punching when using Finisher SR5070 or Booklet Finisher
SR5080.
If the sheets become skewed as a result of punching, press [+] to increase the degree of skew correction.
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[A4 ] 0 1 -1 0.5 mm
[A5 ]
[A5 ]
[B5 JIS ]
[B5 JIS ]
[8
1
/
2
× 11 ]
[8
1
/
2
× 5
1
/
2
]
[8
1
/
2
× 5
1
/
2
]
[Other Paper Sizes]
0811: [Paper Alignment in Shift Tray Setting]
Specify the accuracy of printed paper alignment when applying shift-sorting with Finisher SR5070 or
Booklet Finisher SR5080.
Use this if the tops of the sheets stacked by shift-sorting are misaligned.
2. Details of Menu Items in Adjustment Settings for Skilled Operators
68