If [Speed Priority (Normal)] is selected, the shifting speed is reduced by approximately half to reduce
them is alignment at the top due to inertia when the tray is moved.
Setting Items Values Default Value
[Paper Alignment in Shift Tray Setting] [Speed Priority
(Normal)]
[Accuracy Priority]
[Speed Priority
(Normal)]
0812: [Paper Alignment in Shift Tray: Across Feed]
Adjust the width of the paper alignment jogger in the shift tray in order to reduce vertical variation in
paper alignment due to difference in size, thickness, and paper curl when using Finisher SR5070 or
Booklet Finisher SR5080.
Press [+] to make the width of the paper alignment jogger wider, or [−] to make narrower.
Setting Values
69
To Next Page
Loading...
