8. Has the problem of fainter prints been resolved?
Yes Finished!
No Repeat Steps 6 to 8.
Unprinted: When Using a Transparent Film
White spots appear at the trailing edge when printing on a transparent film.
Cause:
This may occur if:
• When printing in full color including the clear toner and the special color is set to high quality/
printing in full color including the white toner
• When printing in full color with the special color
• Slippery transparent film is used
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solution:
Position the image 5 mm or more away from the edge. Adjust the settings as follows:
7. Image Quality Problem: Full Page
112
To Next Page
Loading...
