• [S]
[Side 1: Clear/Special], [Side 1: White]
[Side 2: Clear/Special], [Side 2: White]
12. Print the image. Has the problem been resolved?
Yes Finished!
No Proceed to "(d) Execute developer refreshing".
(d) Execute developer refreshing
1. In the [Machine: Maintenance] group on the [Adjustment Settings for Operators] menu,
execute 0506: [Execute Developer Refreshing] for the specified color.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to next step.
3. Is it OK to change the paper type?
Yes Change the paper to paper that has a high degree of smoothness or has not been
moisture conditioned.
No Proceed to "(e) Adjust maximum image density".
4. Print the image. Has the problem been resolved?
Yes Finished!
No Proceed to "(e) Adjust maximum image density".
(e) Adjust maximum image density
1. Is it OK to increase the value of image density?
Yes Go to next step.
No Contact your service representative.
2. In [Advanced Settings] for the custom paper you are using, select 1201: [Max Image
Density], and then increase the value for the specified color.
3. Print the image. Has the problem been resolved?
Yes Finished!
7. Image Quality Problem: Full Page
144
To Next Page
Loading...
