• If it is difficult to check and adjust the image position on the printed sheet, print one side of the
format used in page 331 "Aligning the Image Position on Side 2 to That on Side 1 (Using a
Template to Align the Image Position on Side 1 and 2)".
(c) Adjust the magnification (Across feed direction)
Adjust the horizontal magnification to adjust the width between the front and back corners (B) on
the leading edge of the image.
In [Advanced Settings] for the custom paper you are using, select 1101: [Image Position] and
adjust the value in [Across Feed] of [Image Magnification: Side 1].
Press [+] to increase the scaling and [−] to reduce it.
• If it is difficult to check and adjust the image position on the printed sheet, print one side of the
format used in page 331 "Aligning the Image Position on Side 2 to That on Side 1 (Using a
Template to Align the Image Position on Side 1 and 2)".
(d) Adjust the magnification (With feed direction)
Adjust the vertical magnification to adjust the length (position of (C)) of the image.
In [Advanced Settings] for the custom paper you are using, select 1101: [Image Position] and
adjust the value in [With Feed] of [Image Magnification: Side 1].
Press [+] to increase the scaling and [−] to reduce it.
11. Advanced Instructions
326
To Next Page
Loading...
