In [Advanced Settings] for the custom paper you are using, select 1101: [Image Position] and
adjust the value in [Across Feed] of [Image Position: Side 2]
Press [+] to shift the image to the top.
Press [−] to shift the image to the bottom.
<With feed direction>
Adjusting the image (A) on the leading edge of the paper on Side 2 to match the corresponding
image (B) on Side 1
In [Advanced Settings] for the custom paper you are using, select 1101: [Image Position] and
adjust the value in [With Feed] of [Image Position: Side 2]
11. Advanced Instructions
336
To Next Page
Loading...
