20 mm
(0.8 in.)
95 mm
(3.7 in.)
DXT831
Cause:
This may occur if:
• When printing an image including solid-fill parts
• When printing an image with half-tone images in the area from the solid-fill parts to the point 95
mm away from the trailing edge of the paper
• To adjust the following settings, pre-register the type of paper in use as a custom paper. For details
about registering custom papers, see "Specifying a Custom Paper", Preparation.
Solutions:
According to the type of image to be printed, perform the procedure in "(a) If printing an original
including both solid-fill and half-tone parts on the same page" or "(b) If printing an original that has
solid-fill images at the trailing edge of a page and half-tone images at the leading edge of the next
page".
5. Image Quality Problem: Lines
70
To Next Page
Loading...
