[Clear/Special], [White]
4. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
5. Select 1231: [Print Speed], and then set the value in the following corresponding settings
to [Low].
• [BW/FC/FCS]
[BW/FC/FCS]
• [FCS]
[Clear/Special], [White]
• [S]
[Clear/Special], [White]
• [BW/FC/FCS: Fuser Setting HQ]
[BW/FC/FCS]
• [FCS: Fuser Setting HQ]
[Clear/Special], [White]
• [S: Fuser Setting HQ]
[Clear/Special], [White]
6. Print the image. Has the problem been resolved?
Yes Finished!
No Contact your service representative.
5. Image Quality Problem: Lines
72
To Next Page
Loading...
