Taurus-C1 Training
230
Slide 230
Turning the Machine Off
The main power switch must always be turned off before
you start to service the machine.
On the Fiery controller operation panel:
1. Press the [Fiery] tab.
2. Press the [Restart Fiery] button.
3. Press the [Shut Down] button.
On the Main Machine
1. Push the operation switch on the operation panel to turn the
power off.
2. Wait for the operation switch power LED to stop flashing.
Important: Never turn off the main power switch when
the power LED is lit or flashing.
3. After the power LED goes off, open the left front door.
4. Turn the main power switch off.
No additional notes
To Next Page
