Taurus-C1 Training
283
Slide 283
Paper Lift - Tray 2 (1)
A tray detection switch behind the tray detects when tray 2 has
been pushed into the machine.
Then, the 2nd tray lift motor turns on.
A small metal plate touches a gear inside the motor unit. The
amount of rotation of the gear tells the machine how much paper
remains in the tray.
2
nd
Tray Lift
Motor
Arm
Tray Bottom
Plate
Gear
Metal Plate
The coupling of the 2nd tray lift motor rotates the lift arm up against the tray
bottom plate, raises it to the paper feed position, and then stops.
The pickup roller sensor detects when the top of the stack has been raised to the
feed position.
To Next Page
