Taurus-C1 Training
288
Slide 288
Pick-up and Feed – Trays 1 and 2
Separation Roller Release
The separation roller is away from the feed roller, except
during the pick-up and feed-in phase
Easier removal of jams at the entrance
When the paper feed station is selected, the separation
solenoid pushes the separation roller up so that it touches
the paper feed roller.
Separation
Solenoid
Separation
Roller
Feed
Roller
This contact/release mechanism has the following two advantages:
After paper feed is completed, paper sometimes remains between the feed and
separation rollers. If the feed tray is pulled out in this condition, this paper might
be torn. When the separation roller is away from the feed roller, the remaining
paper can be removed from between the rollers.
When paper mis-feeds occur around this area, the operator can easily pull out
the jammed paper between the feed and the separation rollers if the separation
roller is away from the feed roller.
To Next Page
