Taurus-C1 Training
308
Slide 308
Tray Heaters
The machine has two heaters. They can be turned on/off with two
switches on the front of the machine.
The left switch controls the operation of the paper bank heaters of the
main machine (and the LCIT heaters, which are not shown here).
The right switch controls the operation of the ITB heaters (one of which is
shown here).
The heaters do not need to be installed or connected by a technician.
Switches
The heaters are shown in yellow in this diagram.
The operation of the heaters was explained in the Installation section of this
course.
To Next Page
