Taurus-C1 Training
314
Slide 314
Overview - Paper Path
Paper feeds into the registration unit from two paper paths:
Paper Bank [2] (Tray 1 or Tray 2) in the main machine
» Paper from the duplex path [1] also feeds in here (for 2nd side
printing). The path dips slightly from the right drawer into the
vertical transport unit before it re-enters the main paper path.
LCIT [3] (from one of three LCIT trays or bypass unit
installed on top of the LCIT).
ITB Bias Roller
Paper
Transfer
Roller
From LCIT
From Paper Bank
After each sheet passes through the paper registration unit, it is fed between the
ITB bias roller and PTR (paper transfer roller), where the toner image is
transferred from the ITB to paper.
To Next Page
