Taurus-C1 Training
4
Slide 4
Copier Model – Basic System
(1): Main Unit 1st Tray (1000 sheets x 2) – Tray 1
(2): Main Unit 2nd Tray (500 sheets) – Tray 2
(3): Optional A3/DLT LCIT 1st Tray (1000 sheets) – Tray 3
(4): Optional A3/DLT LCIT 2nd Tray (2000 sheets) – Tray 4
(5): Optional A3/DLT LCIT 3rd Tray (1000 sheets) – Tray 5
(6): Optional Bypass Tray (500 sheets) – Tray 6
(7): Optional Finisher (two different ones are available)
This shows the copier model with minimal optional peripherals attached.
Only one LCIT can be installed.
There is no A4/LT LCIT option.
Two finisher models are available: The D512 (corner stapling and booklet
stapling), and the D513 (corner stapling only).
¾ The finisher (7) in the illustration above is the Booklet Finisher D512 .
To Next Page
Loading...
