Taurus-C1 Training
43
Slide 43
Other Points about the Laser Unit
To correct color registration, the skew motor in the laser
unit adjusts the position of the mirrors.
In some other models, a small motor attached to the BTL
does this adjustment.
The new VCSEL technology also improves mechanical
performance by reducing the number of revolutions of the
polygon motors.
This extends the service life of the motors and reduces
motor noise.
Only one SP mode is required after a laser unit is replaced.
The machine automatically detects the parameters of the
new laser unit. It is not necessary to input a lot of SP
settings.
There are no service parts inside the laser unit. If a problem
occurs in the field, replace the laser unit.
No additional notes
To Next Page
Loading...
