Taurus-C1 Training
77
Slide 77
Two Basic Systems
System with SR5040 Booklet Finisher
Interposer
GBC Punch
Folding Unit
Ring Binder
Trimmer
Plockmatic
Bookletmaker
Buffer Pass Unit
LCT
Booklet Finisher
Stacker
Finisher
Bypass Tray
Taurus-P1
Taurus-C1a/b
System with SR5030 Finisher
Note that the peripherals are similar to existing models, but they are all new
models because of the new two-tone cover coloring for the Taurus series.
Notes:
¾ If the multi-folding unit is installed, the buffer pass unit must be installed.
¾ If any of these units are installed, one of the finishers must be installed:
Folding unit, cover interposer, buffer pass unit, GBC punch unit, or ring
binder are installed. If none of these are installed, then the stacker
(SK5020) may be the last finishing option in the configuration if required.
¾ The trimmer can only be installed with the booklet finisher.
To Next Page
