Taurus-C1 Training
45
Slide 45
Liquid Cooling System for Developer (1)
 In addition to the air cooling ducts and fans, this machine has a liquid
cooling system for the developer in the PDCU.
 The radiator cools the liquid, which is pumped to the development unit to
keep the temperature of the developer at the correct level.
 Compared with an air cooling system, this system has two advantages.
 It requires less space than an air cooling system.
 A liquid cooling system makes it possible to maximize operation time,
because the machine does not need to stop temporarily for a PCDU to
cool if temperature becomes too high.
Developer
Pump
Pipe
Radiator
 This is the first time that a liquid cooling system has been used in a digital cut-
sheet product.
To Next Page
Loading...
