Taurus-C1 Training
67
Slide 67
Printing on 300 gsm Paper (2)
 The middle tray of the optional LCIT (Tray 4) can also feed 300
gsm paper.
 All trays can feed coated paper, without installing special rollers.
 Only the stacker and buffer pass unit can handle 300 gsm paper.
 The other peripherals can pass this paper straight through, but
cannot carry out finishing operations.
Tray 4
 Refer to the specifications for details on maximum paper weights that can be
handled by each unit.
To Next Page
Loading...
