87
îš‹Special or coated paper is used.
• Is the airflow strong enough?
The factory-set airflow of the wide LCT may not be strong enough to separate
the sheets. Increase the airflow.
<If custom paper is used>
1.
In [Advanced Settings] for the custom paper in use, increase the value
in [02: Adjust Wide LCT Fan Level].
<If custom paper is not used>
1.
In the [Adjustment Settings for Skilled Operators] menu, increase the
value in [0113: Adjust Wide LCT Fan Level].
• Is the tab sheet holder attached?
By attaching the tab sheet holder, you can prevent air from leaking at the
trailing edge of the paper and improve separation.
For details about attaching the tab sheet holder, see p.111 "Attaching the Tab
Sheet Holder".
To Next Page
Loading...
