92
<If custom paper is not used>
1.
In the [Adjustment Settings for Skilled Operators] menu, adjust the image
position.
• To adjust the position horizontally, change the value in [0101: Adjust Image
Position With Feed Direction].
• To adjust the position vertically, change the value in [0102: Adjust Image
Position Across Feed Direction].
If the problem persists even though you have adjusted the setting to its maximum
and minimum values, contact your service representative.
Note:
• For details about specifying settings in the [Adjustment Settings for Skilled
Operators] menu, see the Adjustment Item Menu Guide.
To Next Page
Loading...
