• Straighten curled or warped paper before loading.
• When paper in trays that are set to automatically eject unnecessary tab stock sheets runs out,
reload the tab stock from the beginning of the cycle (the first sheet).
• When you load paper into the paper tray for the first time or when you change the size or type of
paper in the paper tray, be sure to specify the appropriate paper settings in Tray Paper Settings.
For details, see "Changing Tray Paper Settings", Paper Settings.
• For details about the paper sizes and types that can be used, see page 44 "Recommended
Paper Sizes and Types".
• You might at times hear a rustling noise from paper moving through the machine. This noise does
not indicate a malfunction.
Fanning the paper
1. Loosen the stack by riffling the sheets.
2. Holding its shorter ends, flex the stack back and forth to create space between the sheets.
Repeat this several times.
4. Adding Paper and Toner
34
To Next Page
Loading...
Need help?
General
