Need help?Do you have a question about the Ricoh C2000 and is the answer not in the manual?
General| Category | Printer |
|---|---|
| Printing Technology | Laser |
| Print Speed (Black) | 20 ppm |
| Print Speed (Color) | 20 ppm |
| Duplex Printing | Yes |
| USB Connectivity | Yes |
Explains manual conventions, symbols, and abbreviations used in the document.
Clarifies the meaning of Warning, Caution, and Note indicators in the manual.
Covers the installation of the Fax Unit (Model B868).
Lists and verifies all included accessories for the fax unit.
Step-by-step guide for installing the fax unit.
Details on installing operational panels and keys for the fax unit.
Configuration steps and initial settings for the fax unit.
Instructions for installing the optional handset, model B433.
Procedure for replacing the Facsimile Control Unit (FCU).
Lists and explains various error codes and their suggested causes/actions.
Guides for diagnosing and resolving issues related to IFAX functionality.
Important precautions and notes before consulting service tables.
Lists and explains various bit switch settings for system, IFAX, printer, and communication.
Details on reading, writing, and dumping RAM data for fax boards and NCU parameters.
Configuration for service station fax number, serial number, and PSTN/IPFAX port settings.
Information on FCU, error codes, and G3-1 modem ROM versions.
Procedures for initializing SRAM, erasing files, and resetting bit switches.
Options for printing system parameter lists, service monitors, and protocol dump lists.
Describes test modes for PTT approval, including modem and DTMF tests.
Detailed explanation of System Switches 00, 01, and 02 for various machine settings.
Configuration settings for I-Fax functionality, including transmission and reception.
Settings related to printing output, paper handling, and received fax display.
Settings related to communication protocols, compression, and error handling.
Settings for IP Fax delay levels, preamble wait times, and bit signal reversal.
Table mapping countries/areas to hex values for NCU parameter programming.
Step-by-step guide for programming transmission parameters via the address book.
Details Tx level and cable equalizer settings for fax transmissions.
Settings for initial transmit modem rate and disabled modes.
Settings for compression modes of e-mail attachments.
Settings for original width of e-mail attachments.
Settings for line resolution of e-mail attachments.
Settings for full mode address selection and direct SMTP transmission.
RAM addresses for machine code, ROM version, serial number, and language code.
Details user parameter switches SWUSR_00 through SWUSR_22 for various machine functions.
RAM addresses related to IP-Fax, SIP, Gatekeeper, and other network settings.
Explains the basic fax unit components: FCU and MBU, and their functions.
Describes the FCU (Facsimile Control Unit) and MBU (Memory Board Unit) components.
Explains mail transmission, data formats, and direct SMTP transmission for internet fax.
Explains the concept and basic operation of IP-Fax.
Provides general technical details about the fax transceiver, including size, scanning, and protocols.
Details connectivity, resolution, transmission time, document size, and protocols for IFAX.
Lists network, scan density, original size, transmission protocol, and compatible machines for IP-FAX.
Identifies the components of the fax unit, such as FCU, MBU, and speaker.
To Next Page