IP-Fax
What is IP-FAX?
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC – Internet/LAN Fax Boards
– IP-FAX
T.38 Packet Format
TCP is selected by default for this machine, but you can change this to UDP with IPFAX SW 00 Bit 1.
UDP Related Switches
IP-Fax Switch 01
No. FUNCTION COMMENTS
0-3
Select IP FAX Delay Level Raise the level by selecting a higher setting if too
many transmission errors are occurring on the
network.
If TCP/UDP is enabled on the network, raise this
setting on the T.30 machine. Increasing the delay
time allows the recovery of more lost packets.
If only UDP is enabled, increase the number of
redundant packets.
Level 1~2: 3 Redundant packets
Level 3: 4 Redundant packets
Bit3 Bit2 Bit1 Bit0 Setting
0 0 0 0 Level 0
0 0 0 1 Level 1
0 0 1 0 Level 2
0 0 1 1 Level 3
Settings
User parameter switch 34 (22[H]), bit 0
IP-Fax Gate Keeper usage 0: No, 1: Yes
IP Fax Switches: Various IP-FAX settings (see the bit switch table)
IP-Fax
137
To Next Page
Loading...
Need help?
General
