2. MIME decoding errors
3. File format not recognized as TIFF-F format
4. Resolution, document size, or compression type cannot be accepted
Remaining SAF capacity error
The machine calls the server but does not receive e-mail if the remaining SAF capacity is less than a certain
value (the value depends on IFAX Switch 08. The e-mail will be received when the SAF capacity increases
(for example, after substitute reception files have been printed). The error handling method for this type of
error is the same as for “Abnormal files”.
If the capacity of the SAF memory drops to zero during reception, the machine operates in the same way
as when receiving an abnormal file (refer to “Abnormal files” above).
Secure Internet Reception
To enable password encryption and higher level security: User Tools> System Settings> File Transfer>
POP3/IMAP4 Settings> Encryption (set to “On”)
Transfer Request: Request By Mail
For details: Core Technology Manual – Facsimile Processes – Faxing from a PC – Internet/LAN Fax Boards
– Transfer Request
The fields of the e-mail and their contents are as follows:
Field Content
From E-mail address of the requesting terminal
To Destination address (Transfer Station address)
Bcc Blind carbon copy
Subject From TSI (Fax Message No. xxxx)
Content-Type
Multipart/mixed
Text/Plain (for a text part), image/tiff (for attached files)
Content-Transfer-Encoding Base 64, 7-Bit, 8-bit, Quoted Printable
Mail body (text part)
RELAY-ID-: xxxx (xxxx: 4 digits for an ID code) RELAY:
#01#*X#**01….
Message body MIME-converted TIFF-F.
5. Detailed Section Descriptions
132
To Next Page
Loading...
Need help?
General
