4-7 Restrict TX Retries
This setting determines the number of retries when
connection and transmission fails due to errors.
01-F (1-15 Hex)
I-fax Switch 0A - Not used (do not change the settings) [SP No. 1-102-011]
I-fax Switch 0B - Not used (do not change the settings) [SP No. 1-102-012]
I-fax Switch 0C - Not used (do not change the settings) [SP No. 1-102-013]
I-fax Switch 0D - Not used (do not change the settings) [SP No. 1-102-014]
I-fax Switch 0E - Not used (do not change the settings) [SP No. 1-102-015]
I-fax Switch 0F [SP No. 1-102-016]
No FUNCTION COMMENTS
0
Delivery Method for SMTP RX Files
This setting determines whether files received with SMTP protocol are delivered or output
immediately.
0: Off. Files received via SMTP are output immediately without delivery.
1: On. Files received via SMTP are delivered immediately to their destinations.
1-7 Not used
Printer Switches
Printer Switch 00 [SP No. 1-103-001]
No FUNCTION COMMENTS
0
Select page separation marks
0: Off
1: On
0: If a 2 page RX transmission is split, [*] is printed in the
bottom right corner of the 1st page and only a [2] is printed
in the upper right corner of the 2nd page.
1: If a 2 page RX transmission is split into two pages, for
example, [*] [2] is printed in the bottom right corner of the
1st page and only a [2] is printed in the upper right corner
of the 2nd page.
4. Service Tables
66
To Next Page
Loading...
