When Print Quality Is Not Satisfactory
11
[Details / Solution]
There are two steps.
Please refer to the corresponding item.
a≠b
When cutter marks are not the same level on the right and left position, the media is
skewing.
See the STEP1-1.
a≒b≠0
When cutter marks are misaligned in a media feed direction, the media feed quantity is not
correct.
See the STEP1-2.
a≒b≒0
See the STEP2.
Media feed
direction
Media feed
direction
a
b
a b
a≠b：Media is skewing
a≒b≠0： Media feed quantity is not correct
Media feed
direction
a b
a≒b≒0： Media feed quantity is correct
Cutter mark Cutter mark
Cutter mark
To Next Page
Loading...
