Convenient Usage
47
○ Registration
1. Fill in the registration time, media type, model number, roll/leaf, outer/inner winding, head
height, vacuum level, media width,
and media thickness on the print setting storage sheet.
The confirmation method is indicating below.
Media type
Product number
Check the website of the media vendor or the media
package.
(Fill in the setting selected at media set.)
Outer/Inner winding of print
side
(Fill in the setting selected at media set.)
Press ”Print Adjustment” key on the HOME screen → Head
height
Press “Print Adjustment” key on the HOME screen
→ Press “Media setting” →Vacuum Level
Media width
Media thickness
Press "Check Status" key on the HOME screen → Media tab
2. Perform the media feed quantity and drop position adjustment.
Select the adjustment mode from [6 Pass], [8 Pass], [12 Pass], [16 Pass], and [32 Pass].
in the case of 4CW machines, select from
［6 Pass], [8 Pass], [12 Pass], [16 Pass], [32 Pass], and [12Pass(White)].
3. Press the [Standard procedure] key.
4. Press [▼].
5. Press [Media Records Register / Retrieve].
6. Press [Media Records Register].
7. Press [▲] or [▼] to select the number you want to register.
• Selectable numbers are from 01 to 30.
To Next Page
Loading...
