Ricoh Ri 3000 - Symbols on Power Switch; Users Notes; Other Information for this Machine

12
11:
Do not touch the circuit board. Doing so could result in injury.
12:
Be careful so that your hand is not caught with the main scanning pulley. If it is caught, injury may result.
Symbols on Power Switch
The symbols on the machine’s power switch have the following meanings:
• :POWER ON
• :POWER OFF
User's Notes
• During operation, do not touch the carriage. Do not put your hand into the gap between the top cover and Print
Table.
• For information about how to use the heat press device, see the user manual.
• When removing the fabric, be careful so that your clothing is not stained with ink. If your clothing comes into
contact with ink, wash the stained area with cold water.Other Information for This Machine
12
11