14
Laser(others)
• This machine complies with the requirements of IEC 60825-1:2014 (EN 60825-1:2014) for class 2 laser product. This
equipment contains one AlGaInP laser diode, 660 nanometer wavelength. The beam divergence angle is 21 degrees
(minimum) and 29 degrees (maximum) in the vertical direction, and 7 degrees (minimum) and 11 degrees (maximum) in
the horizontal direction, and laser beams are generated in Continuous Wave (CW) mode. The maximum output power of
the light source is 1 milliwatt.
• WARNING: Although the laser used in the Ri 3000 and Ri 6000 printer is low power, exercise care so that laser
does not shine directly into the eyes. The laser can cause injury.
• CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
• Mangled Hand Warning: Keep body parts away from gears and moving parts.
To Next Page
Loading...
