How to fix Ricoh SP 3510SF All in One Printer that does not turn on?
If your Ricoh All in One Printer doesn't turn on, ensure the power cord is properly connected to both the printer and a working wall outlet. You can verify the outlet's functionality by plugging in another device.
What to do if Ricoh SP 3510SF pages are not printed due to interface cable?
If pages are not printing on your Ricoh All in One Printer, check the interface cable connection and ensure it is the correct type. Try reconnecting the cable.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax | Yes |
| Paper Capacity | 250 sheets |
| Automatic Document Feeder | Yes |
| Functions | Print, Copy, Scan, Fax |
| Duplex Printing | Yes |
| Maximum Paper Size | A4 |
| ADF Capacity | 35 sheets |
| Memory | 128 MB |
| Fax Transmission Speed | 33.6 Kbps |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows |
Lists the names and functions of the parts of the machine.
Describes steps required to install the machine and prepare it for use.
Describes connecting the machine to a computer and a telephone line.
Explains how to load paper into the paper tray and bypass tray.
Explains the procedure for performing basic printing operations.
Describes the basic procedure for making photocopies.
Describes how to register scan destinations in the Address Book using Web Image Monitor.
Describes how to register fax destinations in the Address Book.
Describes transmission modes and basic operations for sending a fax.
Describes fax reception functions and how to select reception modes.
Describes how to configure the copy settings.
Describes how to configure the scanner settings.
Describes how to configure the fax transmission settings.
Describes the network settings.
Describes administrator settings.
Allows checking machine status and changing settings via a Web browser.
To Next Page
