• When closing the front cover, push the upper area of the cover firmly. After closing the cover,
check that the error is cleared.
Removing standard tray/duplex unit jam
If "Misfeed: Stnd. Tray" or "Misfeed: Dup. Unit Remove Paper" appears on the display, follow the
procedure below to remove it.
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• When removing jammed paper, make sure not to trap or injure your fingers.
9. Troubleshooting
370
To Next Page
Loading...
