8
After confirming that “Initializing” has been shown on the machine’s
control panel for more than one minute, double-click the
[UpdateTool.exe]
(Windows) or
[Firmware Update Tool]
(Mac OS X) icon to launch the
firmware update tool.
A dialog box with cautionary statements appears.
Read the cautionary statements carefully, and then click
[OK]
.
The firmware update tool opens.
Do not close the update tool unless you are instructed to do so.
Click
[F/W Update (USB)]
.
Make sure that you keep the power of the machine turned on.
Wait until the “Ready” appears on the machine’s control panel.
When “Ready” appeared, click
[F/W Update (USB)]
again.
To Next Page
Loading...
