EasyManua.ls Logo

Ricoh SP C240SF - Configuring Telephone Network Settings; Selecting the Telephone Line Type; Selecting the Telephone Network Connection Type; Setting the Outside Line Access Number

Ricoh SP C240SF
254 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Telephone Network Settings
Selecting the Telephone Line Type
Select the telephone line type according to your telephone line service. There are two types: tone and
pulse dial.
This function is not available in some regions.
1. Press the [User Tools] key.
2. Press the [ ] [ ] keys to select [Admin. Tools], and then press the [OK] key.
3. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
4. Press the [ ] [ ] keys to select [Dial/Push Phone], and then press the [OK] key.
5. Press the [ ] [ ] keys to select the telephone line type appropriate for your telephone
service, and then press the [OK] key.
6. Press the [User Tools] key to return to the initial screen.
Selecting the Telephone Network Connection Type
Select the type of connection to the telephone network.
There are two types: public switched telephone network (PSTN) and private branch exchange (PBX).
1. Press the [User Tools] key.
2. Press the [ ] [ ] keys to select [Admin. Tools], and then press the [OK] key.
3. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
4. Press the [ ] [ ] keys to select [PSTN / PBX], and then press the [OK] key.
5. Press the [ ] [ ] keys to select [PSTN] or [PBX], and then press the [OK] key.
6. Press the [User Tools] key to return to the initial screen.
Setting the Outside Line Access Number
If the machine is connected to the telephone network through a PBX, set the dial number to access the
outside line.
Configuring Telephone Network Settings
23
2

Table of Contents

Other manuals for Ricoh SP C240SF

Related product manuals