with the Theta camera, make sure that phone is NOT set to automatically connect to the camera. It could cause
capture errors.
Downloading the Theta PC program
1. Download the RICOH THETA Setup.exe from https://support.theta360.com/en/download/.
2. Install the program to the default/recommended directory.
3. Run the RICOH THETA app by clicking the start button and scrolling down to RICOH and selecting the RICOH
app, or start typing Ricoh in the search window and then select RICOH THETA.
Updating the Theta Firmware
It is recommended to use a computer to update the firmware as the files are large.
1. With the Theta camera connected, press the power button (top button). The blue LED on the front of the camera
will turn on, and the camera icon will be illuminated.
Note: The green LED may or may not be illuminated during this step, depending on the level of charge in the
Theta.
2. With the RICOH THETA app open, click File.
3. Click Firmware Update.
4. Click OK.
5. The current version and newest version will be shown, update the firmware if necessary.
https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan
Updated: Sat, 05 Jun 2021 19:32:58 GMT
2
To Next Page
Loading...
Need help?
General
