be replaced by the serial number of your specific device.
Theta SmartPhone App Settings
1. Download and Install the Theta Smartphone App through your phone's app store.
2. Open the app and press the gear symbol.
3. The default settings do not need to be changed, but this page can also be used to check the camera battery level.
https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Configure_Ricoh_Theta_Cameras_For_ScanPlan
Updated: Sat, 05 Jun 2021 19:32:58 GMT
4
To Next Page
Loading...
