For the most up to date documents, bike models, additional information, instructional videos,
And more visit us at Ride1Up.com
4.
Battery Connection & Removal
• The battery cover must be removed before the battery can be unlocked.
• Push down the battery cover latch to remove the cover.
• Insert the key into the battery key hole.
• Use one hand to support the battery once unlatched to avoid dropping and damaging the battery.
• Turn the key in a clockwise direction to unlatch the battery (At 90 degrees).
• Reverse steps to reinstall
• Replace battery with key in the same position, then turn key to lock.
• Reinstall the battery cover and ensure battery cover latch is secured into frame
NOTE: ◆ ALWAYS KEEP THE CHARGER PORT COVERED TO PROTECT AGAINST MOISTURE, WHICH CAN
DESTROY THE BATTERY.
To Next Page
