Why is my RIDGID Pressure Washer jetter running but producing little or no pressure?
- HHeather StevensonOct 27, 2025
There could be several reasons why your RIDGID Pressure Washer jetter is running but producing little to no pressure: * The water supply faucet might not be turned on. Ensure the water supply faucet is fully ON. * The jetter's water supply inlet valve might not be open. Make sure the jetter's water supply inlet valve is ON. * The water supply hose may be blocked. Check that the water supply hose is clear and not kinked or collapsed. * Air might be trapped in the system. Remove the nozzle from the jet hose and run the jetter to flush any air or debris. * The jetter nozzle thrusters could be blocked. Remove the nozzle and clean the thruster orifices using a nozzle cleaning tool. * The nozzle orifices might be clogged. Remove the nozzle and use the nozzle cleaning tool with the p...












