What to do if my RIDGID Water Pump unit does not turn on?
If your RIDGID Water Pump doesn't turn on, ensure the Pump Accessory is plugged in and the switch is on. Also, check the house circuit breaker/fuse. For GFCI issues, see page 8.
Why is there no flow from my RIDGID VP2000?
If you're experiencing no or restricted flow from your RIDGID Water Pump, first check the strainer for clogs. Ensure there's water in the vac drum and that the shut-off valve is open. Also, check the hose for kinks and ensure the hose outlet doesn't exceed 50 feet.
What to do if my RIDGID VP2000 Water Pump is leaking?
If your RIDGID Water Pump is leaking, check the fit on the adapter, coupler, and shut-off valve, ensuring the "O" rings are properly in place. Also, verify the garden hose fit and ensure the hose washer is in place.
What to do if I smell an electrical odor from my RIDGID VP2000 Water Pump?
If you detect an electrical odor from your RIDGID Water Pump, unplug the Pump Accessory and check for any blockages. If the odor persists, return the Pump Accessory to an Independent Service Center.
Explains the meaning of DANGER, WARNING, and CAUTION terms.
Details on how to check received parts against the list.
Explains controls and features of the pump accessory.
Instructions for cleaning the pump accessory and strainer.
Guidance on proper storage and cord management for the pump accessory.
Details what the warranty covers and how long it lasts.
Explains how to get service and the resolution process.
Lists what is not covered and how local laws apply.
General| Type | Submersible |
|---|---|
| Max Flow Rate | 2000 GPH |
| Max Head | 25 ft |
| Discharge Size | 1-1/2 in. |
| Power Source | Electric |
| Horsepower | 0.5 HP |
| Maximum Head | 25 ft |
| Voltage | 120V |
| Amperage | 4.5 amps |
To Next Page
