RIDGID RWCS50T User Manual

SPECIFICATIONS
POWER SUPPLY
REQUIREMENTS 120 V, 60 Hz
MOTOR Single Phase, Dielectric Oil Filled
HORSEPOWER 1/2 HP
LIQUID TEMPERATURE 40° F - 120° F
CIRCUIT REQUIREMENTS 15 A (minimum)
DIMENSIONS 16-5/8 in. high x 9-5/8 in. base
ON LEVEL (FACTORY SET) Approximately 19 in.
OFF LEVEL (FACTORY SET) Approximately 10.5 in.
610001W-005 C 09/19
CONSTRUCTION
MOTOR HOUSING
Cast Iron
VOLUTE
Cast Iron
IMPELLER Glass Reinforced Thermoplastic
SHAFT Steel
DISCHARGE 2 in. NPT
Sewage Pumps
PERFORMANCE (Gal/hr)
Model HP
Discharge Head (Lift Distance)
0 ft 5 ft 10 ft 15 ft
RWCS50T 1/2
10000 9900 8100 3600
Intended for Indoor Use Only
Operating Instructions and Parts Manual RWCS50T
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
© 2019, RIDGID TOOL COMPANY

RIDGID RWCS50T Specifications

General

Model	RWCS50T
Type	Submersible Utility Pump
Horsepower	0.5 HP
Max Flow Rate	50 GPM
Power Source	Electric
Voltage	115V
Thermal Protection	Yes
Weight	12.5 lbs
Cord Length	10 ft
Max Head	25 ft.

Summary

Product Specifications Overview

Electrical and Motor Specifications

Details on power supply, motor type, horsepower, and circuit requirements.

Operating Conditions and Dimensions

Pump Construction Details

Material Components

Lists materials for motor housing, volute, impeller, shaft, and discharge.

Sewage Pump Description and Safety

Unpacking and Safety Warnings

Electrical Safety Precautions

Instructions for proper grounding, GFCI protection, and circuit breaker requirements.

Installation Safety and Guidelines

General Installation Safety Warnings

Covers disconnecting power, avoiding wet surfaces, and specific risks.

Prohibited Usage and Fluid Types

Warns against using the pump for flammable fluids or drinking water.

Extension Cord and Surge Protector Warnings

Advises against using extension cords and surge protectors.

Pump Installation Requirements

Piping and Valve Requirements

Specifies use of rigid piping and a check valve for proper operation.

Handling and Damage Precautions

Typical Sewage Installation Steps

Basin and Pump Placement

Details on basin size, pump placement, and tether switch clearance.

Plumbing and Pipe Connections

Electrical Connections and Testing

Troubleshooting Pump Issues

Troubleshooting Warnings

Safety advice before servicing and information on thermal overload protection.

Pump Not Starting or Running

Pump Cycling Too Frequently

Pump Shutting Off Unexpectedly

Advanced Troubleshooting and Maintenance

Pump Not Shutting Off

Low or No Water Delivery

GFCI Tripping Issues

Limited Warranty Information

Warranty Terms and Conditions